Binks Trophy Automatic

Inside This Document

Part sheet 77-3049 for the Binks Trophy Series automatic spray gun (3465-XXXX-XXXX), which brings the Trophy hand gun's atomization technology to automatic spray applications. The 20 pages document total control of atomizing air pressure, side port air, fluid flow, and spray pattern in high- and low-production settings, plus HVLP operation at high transfer efficiency compliant with California South Coast AQMD regulations. Setup charts, air cap and fluid nozzle combinations (45-11050/45-11060 series), and the complete parts list with repair kits are included.

From the Document

77-3049-R3 (4/2018) 1 / 20 www.carlisleft.com READ ALL INSTRUCTIONS BEFORE OPERATING THIS BINKS PRODUCT. IMPORTANT! DO NOT DESTROY It is the customer's responsibility to have all operators and service personnel read and understand this manual. Contact your local Binks representative for additional copies of this manual. The Trophy HVLP Series of Spray Guns can be used to operate at high transfer efficiencies in compliance with “California South Coast Air Quality Management District” regulations as a High Volume, Low Pressure spray gun. Binks Trophy Series Automatic Spray Gun is the premier spray gun for use in automatic spray applications, incorporating some of the best features of our Trophy hand spray gun. Trophy Automatic gun offers total control of atomizing air pressure, side port air, fluid flow, and spray patterns in high and low production settings. Latest advancements in atomization technology have been incorporated for achieving consistent, fine finishes when spraying a wide range of industrial coatings. All product contact surfaces are manufactured from FDA acceptable materials when using a 45-11050-XX, 45-11060-XX series fluid nozzle and a 47-6860, 47-6864, 47-6865, 47-6866 needle. Binks Trophy Automatic Series Spray Guns can be used with pressure pots and pumps. Binks Trophy Series Spray Guns are offered in three different atomization technologies: HVLP, LVMP and Conventional. SPECIFICATIONS Maximum Air Pressure 140 psi / 9.6 bar (P-1) Maximum Fluid Pressure 140 psi / 9.6 bar (P-2) Gun Body Anodized Aluminum Cylinder Air Pressure to Operate the Gun 65 psi /…