Binks AG 363

Inside This Document

Service manual SB-E-2-645 for the Binks AG363 air-assisted airless automatic manifold gun (AG360 series), rated II 2 G X T6. A fast-changeover, modular applicator built around a screw-type manifold with 1/4" NPS and 1/8" G connections. The 28 pages document the numbers that matter: 10 bar (145 psi) maximum air input, 275 bar (4,000 psi) maximum fluid pressure, tungsten carbide seat components, stainless steel fluid path, and anodised aluminium body — plus tip charts (114-series), service procedures, and parts lists.

From the Document

EN BINKS AG360 Series: SERVICE MANUAL AG363 Air Assisted Airless Automatic Manifold Gun. IMPORTANT! DO NOT DESTROY It is the Customer's responsibility to have all operators and service personnel read and understand this manual. II 2 G X T6 Contact your local Binks representative for additional copies of this manual. READ ALL INSTRUCTIONS BEFORE OPERATING THIS BINKS PRODUCT. SB-E-2-645 R4.0 1/28 EN FLUID AND AIR INLET PRESSURES P1 = P2 = P3 = P1 = P2 = P3 = 1/4" NPS 1/8" G Stainless Steel SCREW TYPE MANIFOLD CONNECTIONS Tungsten Carbide WEIGHT 10 Bar [145 psi] 275 Bar [4000 psi] 4 - 10 Bar [58 psi - 145 psi] Anodised Aluminium FUNCTIONAL DESCRIPTION SPECIFICATIONS Max Air Input Pressure WEIGHT WITH MANIFOLD The AG363 Air Assisted Airless gun is designed to be fast change-over, modular construction applicator for spray finishing on machines and fixed mountings. Intended for most types of general industrial coatings and fine finishing operations, the gun features a stainless steel head suitable for both water based and solvent based applications. The AG363 is mounted on a screw attached low profile stainless steel manifold which can remain in position on the machine while the gun is removed for maintenance or cleaning operations. The gun is designed as a flexible solution for the modern coating applicator with multiple accessories available to further optimise the process. Cylinder Air Pressure Max Fluid Input Pressure Air Cap Material 840g Quickclean™ Coated Aluminium DIMENSIONS WITH MANIFOLD L x H x W mm Gun Body Material Fluid Needle and Seat Construction Stainless Steel…