DeVilbiss AG-362 Manifold

Inside This Document

Service manual SB-E-2-643 for the DeVilbiss AG-362 low-pressure, air-atomization automatic spray gun with lever or screw type manifold. The 28 pages document full specifications: 7 bar (102 psi) maximum air and fluid input pressure, 4–7 bar cylinder air pressure, electroless nickel-plated brass gun body, stainless steel fluid tip and needle, and 1/8" G manifold connections for air, fluid, and cylinder lines. Dimensions with manifold, functional description, parts, and maintenance procedures round out the reference for AG-360 series automatic installations.

From the Document

EN AG362 Low Pressure, Air Atomisation Automatic Spray Gun, with Lever or Screw Type Manifold. SERVICE MANUAL DEVILBISS AG360 Series: Contact your local DeVilbiss representative for additional copies of this manual. IMPORTANT! DO NOT DESTROY It is the Customer's responsibility to have all operators and service personnel read and understand this manual. II 2 G X T6 READ ALL INSTRUCTIONS BEFORE OPERATING THIS DEVILBISS PRODUCT. SB-E-2-643 R4.0 1/28 EN P1= P2= P3= P1= 1/8" G P2= 1/8" G P3= 1/8" G DIMENSIONS WITH MANIFOLD FUNCTIONAL DESCRIPTION SPECIFICATIONS MANIFOLD CONNECTIONS Air Inlet Size L x H x W mm WEIGHT WITH MANIFOLD 127 x 97 x 44 127 x 64 x 89 7 Bar [102 psi] 7 Bar [102 psi] Max Air Input Pressure Max Fluid Input Pressure Cylinder Air Pressure 4 - 7 Bar [58 psi - 102 psi] 40°C Nominal [104°F] Max Ambient Operating Temperature Electroless Nickel Plated Brass Gun Body Material Air Cap Material Fluid Tip and Needle Construction Stainless Steel Stainless Steel Nitride Coated Stainless Steel Fluid Inlet Size Cylinder Inlet Gun Head and Fluid Passageways Seals and O-Rings HDPE, Viton Extreme LEVER TYPE LEVER TYPE LEVER TYPE SCREW TYPE SCREW TYPE SCREW TYPE 1/4" G 1/4" NPS 1/8" G 940g 850g Quickclean™ Coated Aluminium WEIGHT The AG362 low pressure air atomising spray guns are designed to be fast changeover, modular construction applicators, for spray finishing on machines and fixed mountings. The AG362 can be mounted on either a rear entry, lever operated, fast detachable manifold, or a screw attached, low profile manifold, dependant on the part number selected and…