DeVilbiss AG-361E Ceramics/Enamel

Inside This Document

Service manual SB-E-2-642 covering the DeVilbiss AG-361E — the ceramics and enamel configuration of the AG-360 series low-pressure air-atomizing automatic spray gun. The E variant fits the abrasive-material side of the platform: cost-effective automatic application with maximum control and serviceability at 670 g. The 24 pages document specifications, mounting, setup, and service parts (PRO-100 kit reference) shared with the standard AG-361.

From the Document

EN READ ALL INSTRUCTIONS BEFORE OPERATING THIS DEVILBISS PRODUCT. SERVICE MANUAL II 2 G X T6 Contact your local DeVilbiss representative for additional copies of this manual. IMPORTANT! DO NOT DESTROY It is the Customer's responsibility to have all operators and service personnel read and understand this manual. Low Pressure, Air Atomisation Automatic Spray Guns. DEVILBISS AG360 AG361 & AG361E Series: SB-E-2-642 R3.1 1/24 EN P1 = P2 = P3 = P1 = P2 = P3 = 670g Air Inlet Size 40°C Nominal [104°F] The AG361 and AG361E low pressure air atomising spray guns are designed to be cost effective guns with maximum control and serviceability. The AG361 is intended for most types of general industrial coating and fine finishing operations, suitable for both waterbased and solventbased applications. The AG361E is designed for the application of specialised waterbased ceramic and enamel coatings for sanitaryware and vitreous markets. Guns are available with a range of Conventional, Trans-Tech (High Efficiency) and HVLP atomisation air caps, to give a choice of atomisation and Transfer Efficiency parameters. They are designed as a flexible solution for the modern coating applicator with multiple accessories available, to futher optimise the process. Seals and O-Rings HDPE, Viton Extreme Max Air Input Pressure Max Fluid Input Pressure Cylinder Air Pressure Stainless Steel Nitride Coated Stainless Steel Tungsten Carbide Fluid Tip and Needle Construction Gun Head and Fluid Passageways Stainless Steel Gun Body Material Quickclean™ Coated Aluminium FLUID AND AIR INLET PRESSURES (See pages 8 &…