C.A. Technologies/Manual

C.A. Technologies AutoCAT 300H

AutoCAT · AutoCAT 300H

C.A. Technologies service manual for the AutoCAT (models AutoCAT 300H). 5-page PDF — view online or download free from CET.

Viewing: C.A. Technologies AutoCAT 300H

Open Download

Inside This Document

The setup and parts sheet for the C.A. Technologies AutoCAT 300H — the higher-output HVLP automatic in the AutoCAT family. The air cap and fluid nozzle chart maps the 23-1008/23-1010 series caps at 40 PSI maximum gun inlet pressure and 13.5 SCFM to fluid nozzles from 0.8 mm (33-0208) upward with their matching 40-A3xx needles. The 4 pages cover the cap/tip/needle combinations for compliant high-volume automatic spraying.

From the Document

HVLP AIR CAP AND FLUID NOZZLE CHART MODEL NO. AIR CAPS Press / Siphon *MAX GUN INLET PRESS. FOR HVLP FAN CONTROL ORIFICE SCFM @ MAX GUN INLET AIR CAP RING AVAILABLE FLUID NOZZLES TIPS NEEDLES / marking on needle 23-1008 pressure 40** 13.5 33-0208 0.8mm (.022") 40-A308 (308) 23-1010 pressure 40** 13.5 33-0210 1.0mm (.040") 40-A310 (310) 23-1012 pressure 40** 13.5 33-0212 1.2mm (.046") 40-A312 (312) 23-1013 pressure 40** 13.5 33-0213 1.3mm (.052") 40-A313 (313) 23-1014 pressure 40** 13.5 33-0214 1.4mm (.055") 40-A314 (314) 23-1015 pressure 40** 13.5 33-0215 1.5mm (.059") 40-A315 (315) 23-1017 pressure 40** 13.5 33-0217 1.7mm (.070") 40-A317 (317) 23-1019 pressure 40** 13.5 33-0219 1.9mm (.075") 40-A319 (319) 23-1022 pressure 40** 13.5 33-0222 2.2mm (.086") 40-A322 (322) Actual fluid nozzle and air cap combinations are determined by application (see application chart page 4) *Note: Air cap test gages are available to confirm HVLP compliance. *Gun inlet pressures may vary as required by application **When using optional gun regulator, inlet pressure changes to 45psi Included A300H 60-617 AUTOMATIC SPRAY GUN PRODUCT INFORMATION A A A A Aut ut ut ut utoC oC oC oC oCA A A A AT 300H T 300H T 300H T 300H T 300H DISTRIBUTED BY COATING EQUIPMENT TECHNOLOGY, INC PHONE: 586-210-0555 WEB: www.cetinc.com Operation and Maintenance Instructions for A300H A300H A300H A300H A300H Spray Guns Gun Mounting A 1/2” dia. x 5” lg. rod is provided for mounting. The gun can be mounted from the left or right side or from the bottom. Thread the mounting rod (9) into one of the three holes that best…