Sagola X4500 MIX Manual

Inside This Document

The complete manual for the X4500 MIX, Sagola's larger air-assisted airless gun for demanding, high-volume industrial and wood finishing. Covers fluid and air setup, tip selection, maintenance, and the full exploded parts list.

From the Document

Extreme climate fan pattern If the film is thick , this is due to the fact that the air pressure is excessive for the amount of product to be applied. Decrease the amount of product, reduce its viscosity or use a smaller fluid tip in the gun. If sagging occurs, this is due to the fact that the amount of product to be applied is excessive for the air pressure used, that the viscosity is not correct or the application speed is not adequate. Decrease the amount of product, adjust its viscosity or increase the application speed until the required finish is obtained. The spraying width (spraying pattern) obtained will depend on the air nozzle used. If nozzles are required for other applications, contact the Technical Service of SAGOLA S.A.U. Apply the product perpendicularly to the part. Extreme climate conditions: The use of additives in the paint may be required (see paint manufacturer specifications). - Reduce the size of the fan by making it more rounded and with a central core more loaded with product. Parts list This drawing is not the bill of materials.