Sagola Mini Xtreme (Pressure) Manual

Inside This Document

Instruction manual for the pressure-feed Mini Xtreme, a compact industrial gun for detailed and confined-area work. Covers pressure setup, spraying, cleaning, and the full parts breakdown.

From the Document

An excess pressure will create an additional over spray and will reduce the transfer. Warning Before starting the unit you must read, take into consideration and comply with all the indications described in this Manual. This manual must be kept in a safe place, accessible to all users of the unit. The unit must be started and handled exclusively by personnel instructed in its use and must be employed only for the purpose for which it was designed. Likewise, accident prevention standards, regulations, work centre directives and current legislation and restrictions must be taken into consideration at all times. The logotypes of SAGOLA and other SAGOLA products mentioned in this manual, are registered trademarks or brand names of the company SAGOLA S.A.U. Introduction This unit belongs a the family of devices designed to spray products with compressed air with a spray gun, providing a high level of product transfer (T > 65%) and excellent quality finish, as well as low levels of contamination. The equipment consists of the following: Spray gun Accessory wrench Cleaning brush Instruction