Sagola Classic Lux Manual

Inside This Document

Owner's manual for the Classic Lux, a member of Sagola's long-running Classic manual-gun family. Covers setup, adjustment, spraying, cleaning, and the parts breakdown.

From the Document

Before putting the unit into operation, it is advisable to read all the instructions indicated below carefully. Likewise, accident prevention rules, regulations and guidelines for work centres and current laws and restrictions must be taken into account. The unit must be used only by personnel who have been trained adequately in their handling, and only for the uses for which it has been designed. ● Before putting the unit into operation spray cleaning solvent in order to eliminate assembly grease. ● Do not use abrasive or corrosive products (this shortens the service life of the gun). ● Mix the product according to the manufacturer's instructions and filter the product before using it. ● Control the viscosity of the product. ● Apply the product perpendicularly to the part. ● Use the product regulator (1) and the spray width regulator (2) completely open to avoid premature wear of the needle and tip, as well as provide the maximum spraying air. ● Connect the gun to the air supply network or directly to the compressor. ● Pull the trigger after checking the air outlet and then the prod