Sagola 474 Manual

Inside This Document

Instruction manual for the Sagola 474, a professional manual spray gun for automotive and general industrial finishing. Covers operation, accident-prevention guidance, setup, spraying, cleaning, and the full parts list.

From the Document

Before putting the unit into operation, it is advisable to read all the instructions indicated below carefully. Likewise, accident prevention rules, r e g u l a t i o n s a n d g u i d e l i n e s f o r w o r k centres and current laws and restrictions must be taken into account. To fulfil those requirements, the product meet the European standards: CEDirective regarding machines (Directive 2006/42/CE) and the regulations concerning the transposition thereof. The following standardised regulations have been applied: -1, -2, EN-349, EN-563, These also meets the following regulations and directives: ATEX Directive (Directive 2014/34/UE) II 2G X Protection Level II2G suitable for use in Zones 1 and 2. “ X ” marking all static electricity is discharged through air pipes (the air hoses must be "STATIC-FREE" ). It is also in conformity with the following directives: UNE EN-13463-1 Non electrical equipment used for potentially explosive atmospheres. Full technical documentation and service instructions are available. ● Before putting the unit into operation spray cleaning solvent in order t