Sagola 3300 GTO Manual

Inside This Document

The complete owner's manual for the Sagola 3300 GTO — the forged, anodized-aluminum mid-range gun built completely gasket-free and plastic-free in the product zone. Covers setup, air cap and needle/nozzle combinations, spraying technique, cleaning, and the full exploded parts breakdown, with every component individually replaceable thanks to Sagola's M2M (Metal to Metal) construction. Dual-listed across the BodyShop and Industry lines, the GTO crosses from automotive basecoat into wood finishing and light industrial work.

From the Document

Warning Before starting the unit you must read, take into consideration and comply with all the indications described in this Manual. This manual must be kept in a safe place, accessible to all users of the unit. The unit must be started and handled exclusively by personnel instructed in its use and must be employed only for the purpose for which it was designed. Likewise, accident prevention standards, regulations, work centre directives and current legislation and restrictions must be taken into consideration at all times. The logotypes of SAGOLA and other SAGOLA products mentioned in this manual, are registered trademarks or brand names of the company SAGOLA S.A.U. Introduction This unit belongs a the family of devices designed to spray products with compressed air with a spray gun, providing a high level of product transfer (T > 65%) and excellent quality finish, as well as low levels of contamination. The equipment consists of the following: Spray gun Accessory wrench Cleaning brush Instruction manual Web Case 04. Technical details Spraygun with product-feed by gravity with Tip