DeVilbiss JGHV-531 HVLP

Inside This Document

Part sheet SB-2-246 for the DeVilbiss JGHV-531 high volume, low pressure spray gun — a high-production HVLP gun for a wide variety of finishing materials. All models limit air cap pressure to 10 psi for maximum transfer efficiency in compliance with SCAQMD and other air quality rules. The 8 pages cover setup with the 46FF/46FX air cap options, operation, and service, with repair kit KK-4987-2 and accessories (HAV-501 valve, SSL-10 lubricant) listed — including NSN numbers for government procurement.

From the Document

■ Repair Kit KK-4987-2 JGHV-531 HIGH VOLUME LOW PRESSURE SPRAY GUN SB-2-246-R1 ( 7 /2018) 1 / 8 www.carlisleft.com IMPORTANT! DO NOT DESTROY It is the Customer's responsibility to have all operators and service personnel read and understand this manual. Contact your local DeVilbiss representative for additional copies of this manual. READ ALL INSTRUCTIONS BEFORE OPERATING THIS DEVILBISS PRODUCT. IMPORTANT: Before using this equipment, read all safety precautions and instructions. Retain for future use. DESCRIPTION The JGHV-531 is a high production, high volume, low pressure spray gun. It can be used with a wide variety of finishing materials. All models are designed to provide maximum transfer efficiency by limiting air cap pressure to 10 psi (complies with rules issued by SCAQMD and other air qual - ity authorities). The gun is intended for use with pressure feed paint supply only. Most finishing materials can be atomized with the 33A air cap. The 33A air cap should be used where possible as it consumes less air volume (CFM) and has slightly better transfer efficiency than the 46MP or 83MP air caps. However, more difficult to atomize materials (i.e. low VOC's) or high flow applications (over 12 ounces/minute), are ideal for the 46MP (maximum performer) air cap, fluid tip and baffle combination. Also available is the 83MP (maximum performer) for even higher flows (17 oz./min. and above), and viscosities. Refer to the air cap chart for more information. Spray guns with a 33A nozzle combination can be converted to 46MP or 83MP if desired. AIR CAPS - PATTERNS - APPLICATIONS…