DeVilbiss FLG4 Gravity Feed Cup

Inside This Document

Part sheet SB-2-775 for the DeVilbiss FLG4 — a lightweight, anodized aluminum, general purpose gravity feed spray gun for a wide range of spraying applications, with models for HVLP, waterbased, and solvent materials. The 8 pages cover setup with the GFC-501 gravity cup, air cap options (HC-4419, HC-4719), operation, and service with the FLG4-488-K kit reference — the budget-friendly DeVilbiss gravity platform for shops and light production.

From the Document

SB-2-775-R1 (7/2018) 1 / 8 www.carlisleft.com IMPORTANT: Before using this equip - ment, read all safety precautions on page 2 and instructions. Keep for future use. GUN DESCRIPTION The FLG4 is a light weight, anodized alumi - num, general purpose gravity feed spray gun designed for use in various types of spraying applications. Various models are available to handle HVLP, water based, and solvent based spraying applications. These guns are sold with either a 900 cc aluminum cup (702576) or a 20 oz. Acetal cup (GFC-501). These guns are suitable for use with water based materials ONLY if used with a Acetal cup, or with a disposable cup system. Halogenated hydrocarbon sol - vents - for example; 1, 1, 1- trichlo - roethane and methylene chloride - can chemically react with the aluminum in this gun and cause an explosion hazard. Read the label or data sheet for the material you intend to spray. Do not use spray materials containing these solvents with this spray gun. IMPORTANT: This gun may be used with most common coating and finishing materials. It is designed for use with mildly corrosive and non-abrasive materials. If used with other high corrosive or abrasive materials, it must be expected that frequent and thorough cleaning will be required and the necessity for replace - ment of parts will be increased. HVLP MODELS: HVLP models of this gun were manufactured to provide maximum transfer efficiency by limiting air cap pressure to 10 psi (complies with rules issued by SCAQMD and other air quality authorities). HVLP models of this gun will produce approximately 10 psi cap…