DeVilbiss Compact Trans-Tech P/S

Inside This Document

Service manual SB-2-542-R1 for the DeVilbiss Compact Trans-Tech pressure feed and siphon feed spray gun — the compliant mid-pressure atomization platform, ATEX-certified for Zones 1 and 2 and rated for solvent and waterbased materials. The 10 pages cover setup, operation, and maintenance, with COM-510/513/522 kits and SP-series parts (SP-100, SP-200S) listed for rebuilding pressure- and siphon-fed Trans-Tech Compacts.

From the Document

SB-2-542-R1 (5/2018) 1 / 10 www.carlisleft.com IMPORTANT! DO NOT DESTROY It is the Customer's responsibility to have all operators and service personnel read and understand this manual. Contact your local DeVilbiss representative for additional copies of this manual. READ ALL INSTRUCTIONS BEFORE OPERATING THIS DEVILBISS PRODUCT. EN SERVICE MANUAL TRANS-TECH ® PRESSURE FEED / SIPHON FEED SPRAYGUN EN SB-2-542-R1 ( 5 /2018) 2 / 10 www.carlisleft.com Dave Smith Bournemouth,BH11 9LH,UK 4-3197R-2 Product Description/Object of Declaration: Solvent and Water based Materials Zone 1 / Zone 2 Suitable for use in hazardous area: This Product is designed for use with: Compact The object of the declaration described above is in conformity with the relevant Union harmonisation legislation: This Declaration of Conformity /incorporation is issued under the sole responsiblility of the manufacturer: Carlisle Fluid Technologies UK Ltd, Ringwood Road, Bournemouth, BH11 9LH. UK EU Declaration of Conformity Protection Level: II 2 G X Notified body details and role: TRAC Global Ltd (0891) Lodging of Technical file 11-Jul-16 Signed for and on behalf of Carlisle Fluid Technologies UK Ltd: Machinery Directive 2006/42/EC ATEX Directive 2014/34/EU by complying with the following statutory documents and harmonized standards: EN ISO 12100:2010 Safety of Machinery - General Principles for Design BS EN 1953:2013 Atomising and spraying equipment for coating materials - Safety requirements EN 1127-1:2011 Explosive atmospheres - Explosion prevention - Basic concepts EN 13463-1:2009 Non electrical equipment…