C.A. Technologies/Manual

C.A. Technologies Tomcat 100C

Tomcat · Tomcat 100C

C.A. Technologies service manual for the Tomcat (models Tomcat 100C). 5-page PDF — view online or download free from CET.

Viewing: C.A. Technologies Tomcat 100C

Open Download

Inside This Document

The setup and parts sheet for the C.A. Technologies Tomcat 100C — the conventional Tomcat. The air cap and fluid nozzle chart maps the 21-2166/21-2266/21-2366 series caps across the 0.6–1.8 mm tip range with available nozzles from 0.6 mm (31-0606), in 17-4PH and 300-series stainless construction. The 4 pages cover cap/tip/needle combinations and reorder part numbers for the Tomcat on general finishing work.

From the Document

CONVENTIONAL AIR CAP AND FLUID NOZZLE CHART MODEL NO. PRESS / SIPHON AIR CAP FLUID TIP RANGE FAN CONTROL SCFM AIR CAP RING AVAILABLE FLUID NOZZLES NEEDLES / marking on needle 21-2166 0.6 - 1.8 5 21-2266 0.6 - 1.8 12 17-4PH STAINLESS 300 STAINLESS 21-2266T 0.6 - 1.8 12 31-0606 0.6mm (.022") 21-2366 0.6 - 1.8 12 31-0607 0.7mm (.028") 21-2466 0.6 - 1.8 15 31-0610 1.0mm (.040") 21-2467 2.2 15 31-0612 1.2mm (.046") 21-2268 2.8 15 31-0613 1.3mm (.052") 21-2163 0.6 - 1.8 8 31-0615 1.5mm (.059") 21-2263 0.6 - 1.8 14 31-0618 1.8mm (.070") 21-2266-3 0.6 - 1.8 16.2 31-0622 2.2mm (.086") 40-1122 (122) 21-2266-3T 0.6 - 1.8 16.2 31-0628 2.8mm (.110") 40-1128 (128) 21-2167 2.2 14.5 21-2267 2.2 15 CARBIDE CARBIDE 21-2168 2.8 14 31-0618V 1.8mm (.070") 40-6201 21-2766B 1.0 - 1.8 8 31-0622V 2.2mm (.086") 40-6201 21-200** 1.5 - 1.8 5.2 31-0628V 2.8mm (.110") 40-6201 21-2201** 2.2 5.2 Actual fluid nozzle and air cap combinations are determined by application (see application chart page 4) *Gun inlet pressures may vary as required by application **200 Air cap requires P/N 21-1583 base & 21-1584 ring 40-1110 (110) 40-1115 (115) T100C 60-1505 included Siphon Pressure Internal Mix 40-1107 (107) PRESSURE/SIPHON FEED SPRAY GUN PRODUCT INFORMATION T T T T TOMC OMC OMC OMC OMCA A A A AT 1 T 1 T 1 T 1 T 100C 00C 00C 00C 00C DISTRIBUTED BY COATING EQUIPMENT TECHNOLOGY, INC PHONE: 586-210-0555 WEB: www.cetinc.com Operation and Maintenance Instructions for T1 T1 T1 T1 T100C 00C 00C 00C 00C Spray Guns Operation 1. Connect air supply hose at handle of gun. 2. Connect a pressurized fluid supply or paint…