C.A. Technologies Panther 100H

Inside This Document

The setup and parts sheet for the C.A. Technologies Panther 100H — the compliant HVLP Panther. The chart maps the 21-1090/21-1091/21-1092 pressure caps at 15 PSI maximum gun inlet and 6–8 SCFM to fluid nozzles from 0.5 mm (31-0205) upward with matching needles. The 4 pages cover low-CFM compliant setup on the Panther platform for adhesive and industrial applications.

From the Document

HVLP AIR CAP AND FLUID NOZZLE CHART MODEL NO. AIR CAPS Press / Siphon *MAX GUN INLET PRESS. FOR HVLP FAN CONTROL SCFM @ MAX GUN INLET AIR CAP RING AVAILABLE FLUID NOZZLES TIPS NEEDLES / marking on needle 21-1090 pressure 15 6 31-0205 0.5mm (.020") 21-1091 pressure 15 8 31-0208 0.8mm (.022") 21-1092 pressure 15 8 31-0210 1.0mm (.040") 21-1093 pressure 18 10 31-0212 1.2mm (.046") 21-1094 pressure 33 13 31-0213 1.3mm (.052") 21-1095 pressure 50 22.5 31-0214 1.4mm (.055") 21-1095T pressure 50 22.5 31-0215 1.5mm (.059") 21-1097 pressure 50 22.5 31-0216 1.6mm (.063") 21-1195 pressure 50 22.5 31-0217 1.7mm (.070") 21-1197 pressure 50 22.5 31-0412 1.2Fmm (.046") 40-1112F (112F) 31-0414 1.4Fmm (.055") 40-1114F (114F) 31-0417 1.7Fmm (.070") 40-1117F (117F) *Note: Air cap test gages are available to confirm HVLP compliance. Actual fluid nozzle and air cap combinations are determined by application (see application chart page 4) *Gun inlet pressures may vary as required by application 40-1100 (100) P100H included 21-1001 60-1502 (#2) P P P P Pant ant ant ant anther 1 her 1 her 1 her 1 her 100H 00H 00H 00H 00H TEFLON COATED SPRAY GUN PRODUCT INFORMATION DISTRIBUTED BY COATING EQUIPMENT TECHNOLOGY, INC PHONE: 586-210-0555 WEB: www.cetinc.com Operation and Maintenance Instructions for P P P P P 100H 100H 100H 100H 100H Spray Guns Operation 1. Connect air supply hose at handle of gun. 2. Connect a pressurized fluid supply to the gun fluid inlet. 3. Fluid flow can be controlled using the fluid control knob, this restricts flow by limiting needle travel. It is best to control fluid flow by…