C.A. Technologies Lynx 300H

Inside This Document

The setup and parts sheet for the C.A. Technologies Lynx 300H — the 300-series HVLP Lynx. The chart maps the 23-1008/23-1010/23-1012 pressure caps at 40 PSI maximum gun inlet pressure and 13.5 SCFM to fluid nozzles from 0.8 mm (33-0208) with matching 40-13xx needles. The 4 pages cover compliant HVLP combinations for production spraying on the 300-series platform.

From the Document

HVLP AIR CAP AND FLUID NOZZLE CHART MODEL NO. AIR CAPS Press / Siphon *MAX GUN INLET PRESS. FOR HVLP FAN CONTROL SCFM @ MAX GUN INLET AIR CAP RING AVAILABLE FLUID NOZZLES TIPS NEEDLES / marking on needle 23-1008 pressure 40** 13.5 33-0208 0.8mm (.022") 40-1308 (308) 23-1010 pressure 40** 13.5 33-0210 1.0mm (.040") 40-1310 (310) 23-1012 pressure 40** 13.5 33-0212 1.2mm (.046") 40-1312 (312) 23-1013 pressure 40** 13.5 33-0213 1.3mm (.052") 40-1313 (313) 23-1014 pressure 40** 13.5 33-0214 1.4mm (.055") 40-1314 (314) 23-1015 pressure 40** 13.5 33-0215 1.5mm (.059") 40-1315 (315) 23-1017 pressure 40** 13.5 33-0217 1.7mm (.070") 40-1317 (317) 23-1019 pressure 40** 13.5 33-0219 1.9mm (.075") 40-1319 (319) 23-1022 pressure 40** 13.5 33-0222 2.2mm (.086") 40-1322 (322) Actual fluid nozzle and air cap combinations are determined by application (see application chart page 4) *Note: Air cap test gages are available to confirm HVLP compliance. *Gun inlet pressures may vary as required by application **When using optional gun regulator, inlet pressure changes to 45psi Included L300H 60-1502 (#2) L L L L Lynx 300H ynx 300H ynx 300H ynx 300H ynx 300H PRESSURE FEED SPRAY GUN PRODUCT INFORMATION DISTRIBUTED BY COATING EQUIPMENT TECHNOLOGY, INC PHONE: 586-210-0555 WEB: www.cetinc.com Operation and Maintenance Instructions for L300H L300H L300H L300H L300H Spray Guns Operation 1. Connect air supply hose at handle of gun. 2. Connect a pressurized fluid supply to the gun fluid inlet. 3. Fluid flow can be controlled using the fluid control knob, this restricts flow by limiting needle travel. It…