C.A. Technologies Jaguar SLP
Jaguar SLP
C.A. Technologies service manual for the Jaguar SLP. 5-page PDF — view online or download free from CET.
Inside This Document
The setup and parts sheet for the C.A. Technologies Jaguar SLP — the super-low-pressure member of the Jaguar family. The HVLP chart maps the 23-1308/23-1310/23-1312 caps to fluid nozzles from 0.8 mm (33-0208) with matching 40-13xx needles, including maximum inlet pressures and SCFM consumption, with W and W-PPS cup variants flagged. The 4 pages cover compliant SLP setup and reorder part numbers.
From the Document
HVLP AIR CAP AND FLUID NOZZLE CHART MODEL NO. AIR CAPS *MAX GUN INLET PRESS. FOR HVLP FAN CONTROL SCFM @ MAX GUN INLET STANDARD IN CAT PACK AVAILABLE FLUID NOZZLES TIPS NEEDLES / marking on needle 23-1308 33-0208 0.8mm (.022") 40-1308 (308) 23-1310 W, W-PPS 33-0210 1.0mm (.040") 40-1310 (310) 23-1312 33-0212 1.2mm (.046") 40-1312 (312) 23-1313 W, A, PPS 33-0213 1.3mm (.052") 40-1313 (313) 23-1314 33-0214 1.4mm (.055") 40-1314 (314) 23-1315 W, A, PPS 33-0215 1.5mm (.059") 40-1315 (315) 23-1317 33-0217 1.7mm (.070") 40-1317 (317) 23-1319 W, A, PPS 33-0219 1.9mm (.075") 40-1319 (319) 23-1322 33-0222 2.2mm (.086") 40-1322 (322) Actual fluid nozzle and air cap combinations are determined by application (see application chart page 4) W = Wood *Note: Air cap test gages are available to confirm HVLP compliance. A = Automotive *Gun inlet pressures may vary as required by application PPS = 3M™ PPS™ Jaguar SLP (JSLP) 60-1504 (S) 13.5 29* GRAVITY FEED SPRAY GUN PRODUCT INFORMATION Jaguar SLP DISTRIBUTED BY COATING EQUIPMENT TECHNOLOGY, INC PHONE: 586-210-0555 WEB: www.cetinc.com Operation and Maintenance Instructions for JSLP Spray Guns Operation 1. Connect air supply hose at handle of gun. 2. Screw the paint cup onto the gun’s gravity feed fluid inlet. 3. Fluid flow can be controlled using the fluid control knob, this restricts flow by limiting needle travel. It is best to control fluid flow by proper selection of fluid orifice size and use the fluid control knob to “fine tune flow rate”. 4. Fan width can be adjusted using the fan control knob. Turning the knob clockwise narrows the…
Document Details
- Brand
- C.A. Technologies
- Type
- Manual
- Product Line
- Jaguar SLP
- Pages
- 5
- Language
- en
Related Documents
C.A. Technologies 60-TRBN-2 Turbine
60-TRBN-2
C.A. Technologies service manual for the 60-TRBN-2. 2-page PDF — view online or download free from CET.
C.A. Technologies Bobcat
Bobcat
C.A. Technologies service manual for the Bobcat. 5-page PDF — view online or download free from CET.
C.A. Technologies CAT SLP Parts Sheet
CAT SLP
C.A. Technologies parts sheet for the CAT SLP. 5-page PDF — view online or download free from CET.
C.A. Technologies CAT-X
CAT-X
C.A. Technologies service manual for the CAT-X. 5-page PDF — view online or download free from CET.
