C.A. Technologies CPR-T3

Inside This Document

The nozzle/needle chart and parts sheet for the C.A. Technologies CPR-T3 spray gun. Orifice sizes run 1.3 mm through 2.2 mm (33-0213 to 33-0222 tips with 40-P13xx needles) on the 23-1301 and 23-2101 air caps at 29 PSI maximum gun inlet pressure for HVLP/compliant operation. The larger tip range points the T3 at higher-build primers and heavier-bodied materials than the fine-finish CPR variants.

From the Document

CA Tech CPR-T3 Spray Gun Click-n-Pick Spare Parts Cutsheet Easily find spare parts without digging through the full manual. Click on part numbers to order. Orifice Size Air Cap Max Gun Inlet Pressure for HVLP / Compliant Orifice (Tip) Needle 1.3 23-1301* / 23-2101 29 33-0213 40-P1313 1.4 23-1301* / 23-2101 29 33-0214 40-P1314 1.5 23-1301* / 23-2101 29 33-0215 40-P1315 1.7 23-1301* / 23-2101 29 33-0217 40-P1317 1.9 23-1301* 29 33-0219 40-P1319 2.2 23-1301* 29 33-0222 40-P1322 NOZZLE NEEDLE CHART Part Number Description Part Number Description 1 60-1130 Body Assembly 6 See Below Needle 2 33-1202 Nozzle Body 7 T21 Needle Return Spring 3 See Below Orifice 8 T25 Fluid Control Knob 4 See Below Air Cap 5 T27 Packing 9 10-111 Tool Kit: Gun wrench, filter, needle packing wrench and brush g€‚E„Q €—2ƒ I P W R S U V T IH BxX h2 2   2 2 2™—  2  2 2@5IHA „2 2—™ 2 2 2 — —2—   2— 2 2˜2 2 ™—"22— 2—F2…22—™ 2%  ™ 2 2IHEIII2F Be 2g—22—2— 2— ——˜22™  2r†v€2™ — ™F Material Orifice Size CPR-T3 HVLP 23-1301 CPR-T3 Compliant 23-2101 Filler 1.7 29 PSI @ 13 CFM 29 PSI @ 11 CFM Primer, Washprimer, Epoxy 1.4 - 1.7 29 PSI @ 13 CFM 29 PSI @ 11 CFM Sealer 1.4 - 1.7 29 PSI @ 13 CFM 29 PSI @ 11 CFM Single Stage 1.3 - 1.4 29 PSI @ 13 CFM 29 PSI @ 11 CFM Basecoat 1.3 - 1.4 29 PSI @ 13 CFM 29 PSI @ 11 CFM Clearcoat 1.3 - 1.4 29 PSI @ 13 CFM 29 PSI @ 11 CFM High Solids Clears 1.4 - 1.5 29 PSI @ 13 CFM 29 PSI @ 11 CFM CPR Techline Nozzle Selection Chart y) —2—2w— —™…