C.A. Technologies Cougar

Inside This Document

The product information manual for the C.A. Technologies Cougar air-assist airless spray gun. It runs the same 36-series tip lineup as the Bobcat (0.007–0.021" orifices, 20–80 degree spray angles) and adds a fluid shut-off knob that locks the trigger when turned clockwise. Operation, maintenance, and the complete parts list make it the service reference for the Cougar platform.

From the Document

AVAILABLE AIR ASSIST AIRLESS ORIFICES PART NO. ORIFICE SIZE SPRAY ANGLE (DEGREES) APPROX. PATTERN SIZE PART NO. ORIFICE SIZE SPRAY ANGLE (DEGREES) APPROX. PATTERN SIZE 36-207 0.007 20 4" 36-315 0.015 30 6" 36-309 0.009 30 6" 36-415 0.015 40 8" 36-409 0.009 40 8" 36-515 0.015 50 10" 36-311 0.011 30 6" 36-615 0.015 60 12" 36-411 0.011 40 8" 36-715 0.015 70 14" 36-511 0.011 50 10" 36-815 0.015 80 16" 36-213 0.013 20 4" 36-417 0.017 40 8" 36-313 0.013 30 6" 36-517 0.017 50 10" 36-413 0.013 40 8" 36-619 0.019 60 12" 36-513 0.013 50 10" 36-621 0.021 60 12" 36-613 0.013 60 12" Coating Atomization Technologies 337 South Arthur Avenue, Louisville CO 80027 Phone: 888.820.4498, Fax: 303.438.5708 www.spraycat.com Cougar Cougar Cougar Cougar Cougar AIR ASSIST AIRLESS SPRAY GUN PRODUCT INFORMATION Operation and Maintenance Instructions for Cougar Cougar Cougar Cougar Cougar Spray Guns Operation 1. Connect air supply hose at handle of gun. 2. Connect material supply hose from pump to the gun fluid inlet. 3. The fluid shut-off knob locks the trigger and prevents gun operation when turned clockwise as far as possible. 4. Maximum pattern width is determined by tip selection. Turning the fan control knob counter clockwise will narrow the fan. Pattern is maximum when fan control is completely closed. 5. For HVLP compliance, do not exceed 15 psi air pressure at gun handle. MAINTENANCE NOTE: - Complete gun disassembly is not recommended for normal cleaning and maintenance. IMPORTANT! Relieve gun fluid pressure to 0 psi before performing any maintenance. 10-113 Complete Gun Repair Kit 10-127 Gun…