Binks Model 95

Inside This Document

Part sheet 77-2625 for the Binks Model 95 Signature Series spray gun (6121-XXXX-X) — the premier handheld gun in the Binks line, combining the best of three predecessors as the platform that replaced the Models 18, 62, and BBR. A high-production gun with stainless steel fluid passages usable with most coatings. The 12 pages cover setup combinations, operation, maintenance, and the complete service parts breakdown for the flagship manual gun.

From the Document

77-2625-R14 (4/2018) 1 / 12 www.carlisleft.com Model 95 Signature Series Spray Gun This handheld gun is the premier spray gun in the Binks line. A combination of the three best industrial spray guns, Model 95 sets a new standard. The Model 95 is a high production gun with stainless steel fluid passages which may be used with most coatings. This new gun replaces Models 18, 62 and BBR spray guns, incorporating the best features of all three: drop- forged anodized alumninum body, stainless steel fluid passages, adjustable floating needle valve, stainless steel or tungsten carbide fluid nozzle, plated drop-forged brass self-centering air nozzle, brass air valve cartridge, adjustable spray pattern, 3/8” NPS(m) fluid inlet, 1/4” NPS(m) air inlet. Weight 1 lb., 11 oz. Illustration Key 1. Air Nozzle Assembly 2. Gun Body 3. Side Port Controls 4. Fluid Control Knob 5. Air Connection 1/4” NPS(m) 6. Fluid Connection 3/8” NPS(m) 1 3 2 4 5 6 PRESSURE FEED TANK HOOKUP For medium production spraying (sin gle regulator). Air pressure for atomi zation is regulated at extractor, fluid pressure at tank regulator (see figure 3). PRESSURE FEED TANK HOOKUP For portable painting operations (double regulator). Air pressure for atomization and fluid supply is regulated by two individual air regulators on tank (see figure 4). TYPES OF INSTALLATION SIPHON FEED CUP HOOKUP Air pressure for atomization is regulated at extractor. The amount of fluid is adjusted by fluid control screw on gun, viscosity of paint, and air pressure (see figure 1). PRESSURE FEED CUP HOOKUP For fine finishing with limited…