What tip sizes are available?

A wide range — 0.5 mm to 2.5 mm via the 60-TRBN-3-05 through -25 needle/nozzle sets — so the turbine gun can handle fine finishes through heavier-bodied coatings. With turbine HVLP, choosing the right tip for your material is the main setup decision.

Where can I get turbine parts and tip sets?

Tip sets (60-TRBN-3 series), the 60-TRBN-8 and 60-TRBN-9 repair kits, the pressure cup, and the fan control assembly are all available through CET. Call or text 586-210-0555 and we'll match the parts to your turbine setup.

C.A. Technologies

C.A. Technologies 60-TRBN-2 Turbine Spray Gun

C.A. Technologies 60-TRBN-2 — Turbine HVLP Spray Gun, No Compressor Required

The C.A. Technologies 60-TRBN-2 is a turbine HVLP spray gun that runs off a turbine air source instead of a shop compressor — making it ideal for on-site work, mobile finishing, and shops without compressed air. Turbine air is warm, dry, and clean, which suits fine finishing well. The gun covers a wide 0.5 mm to 2.5 mm tip range via the 60-TRBN-3-05 through -25 needle/nozzle sets, so tip selection — matching fluid delivery to your material — is the main setup decision. A pressure cup and fan control assembly round out the system, and the 60-TRBN-8 and 60-TRBN-9 repair kits keep it serviceable.

Shop Now View Manual

Specifications

Type

Turbine HVLP spray gun

Feed

Gravity / pressure cup (turbine air supply)

Body

Forged aluminum

Fluid Path

Stainless steel

Nozzle Range

0.5 mm – 2.5 mm

Air Supply

Turbine (no compressor required)

Key Features

Turbine HVLP

runs off a turbine, no shop compressor required

Warm, dry, clean turbine air well suited to fine finishing

Wide 0.5–2.5 mm tip range (60-TRBN-3-05 through -25 sets)

Ideal for on-site, mobile, and no-compressed-air shops

Pressure cup and fan control assembly available

60-TRBN-8 / 60-TRBN-9 repair kits for service

Model Selection Guide

With turbine HVLP, tip selection is the main decision — choose a 60-TRBN-3 needle/nozzle set from 0.5 mm to 2.5 mm to match your material. Parts and tip sets are available by phone — call or text CET at 586-210-0555.